Dell S6100, Руководство по настройке

Страница: 1243 / 1743

We are the root of Vlan 5
Configured hello time 2, max age 20, forward delay 15
Interface Designated
Name PortID Prio Cost Sts Cost Bridge ID PortID
-------------------------------------------------------------
Te 1/1/1/1 128.140 128 200000 FWD 0 32773 0001.e832.73f7 128.140
Te 1/1/2/1 128.142 128 200000 DIS 0 32773 0001.e832.73f7 128.142
Interface
Name Role PortID Prio Cost Sts Cost Link-type Edge
--------------------------------------------------------
Te 1/1/1/1 Desg 128.140 128 200000 FWD 0 P2P No
Te 1/1/2/1 Dis 128.142 128 200000 DIS 0 P2P No
Dell(conf-pvst)#
Related Commands
• protocol spanning-tree pvst – enter SPANNING TREE mode on the switch.
protocol spanning-tree pvst
To enable PVST+ on a device, enter the PVST+ mode.
Syntax protocol spanning-tree pvst
To disable PVST+, use the disable command.
Defaults none
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide .
Version Description
9.10(0.0) Introduced on the S6100-ON.
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
Per-VLAN Spanning Tree Plus (PVST+) 1243