Figure 12. Two-post center-mount configuration
Four-post threaded configuration
CAUTION:
To be NEBS Earthquake Z4-compliant, you must remove the tool-less latch castings described in Step 1.
1
Remove the latch castings from each end of the ReadyRails assemblies.
Use a Torx driver to remove the two screws from each latch casting and remove each casting, item 1. Retain the castings for future
rack requirements.
2
For each rail, attach the front and back flanges to the post flanges with two user-supplied screws at each end, item 2.
22
S6010–ON installation
