4. Disassembly and Assembly Procedures
Use a Philips-head screwdriver to tighten 6pcs
screws for locking the middle bezel with front bezel.
(No.1~6 Screw size=M2x3.3, Torque=1.2
±
0.2kgfxcm)
S10
S7
Take 1pcs power key board and 1pcs middle bezel,
then locate the power key board to the specific
position of the middle bezel. Put the unit into a fixture,
and then use
a Philips-head screwdriver to tighten
1pcs screw for locking the power key board with the
middle bezel. Cover the power key board with 1pcs
black adhesive tape.
(No.1 Screw size= M2x2.4, Torque=0.8
±0.2
kgfxcm)
S8
Assemble the middle bezel with power key board and
touch key board with the front bezel and panel unit.
S11
S12
Adjust the bracket chassis module, and then u
.
se a
Philips-head screwdriver to tighten 4pcs screws for
locking the bracket chassis module with the panel
(
No.1~4 Screw size= M3x0.5x2.8, Torque=5
~6
kgfxcm)
1
S13
Fix the power key cable by tear off 2pcs tape papers
on the back of the cable.
Use a Philips-head
screwdriver to tighten 13pcs screws for locking the
middle bezel with the panel module.
(No.1~13 Screw size= M3x5, Torque=3~4kgfxcm)
S9
Take 1pcs touch key board, and tear off the release
paper on the specific position of the middle bezel, and
then paste the touch key board on the middle bezel.
Take 1pcs front bezel, lift up the panel module and
then assemble the front bezel with the panel.
