4. Disassembly and Assembly Procedures
S10
S9
S11
S8
S7
Tear off 2pcs tapes of the power cable. Use a Philips-
head screwdriver to remove 6pcs screws for
unlocking the middle bezel with the front bezel. Use a
Philips-head screwdriver to remove 13pcs screws for
unlocking the middle bezel with the panel module.
(No.1~6 Screw size=M2x3.3,Torque=3
±
0.5kgfxcm;
No.7~19 Screw size=M3x5, Torque=3~4kgfxcm)
Remove the middle bezel and put it into a fixture jip,
then tear off the tape for releasing the touch key
board away from the middle bezel. Tear off the black
PVC tape and use
a Philips-head screwdriver to
remove 1pcs screw for unlocking the power key
board with the front bezel.
(No.1 Screw size= M2x2.4, Torque=0.8
±0.2
kgfxcm)
1
Lift up the panel module and pull out the front bezel
for releasing the front bezel.
U
.
se a Philips-head screwdriver to remove 4pcs
screws for locking the bracket chassis module with
the panel
(No.1~4 Screw size= M3x0.5x2.8, Torque=5
~6
kgfxcm)
Move the bracket, and then disconnect the LVDS
cable from the connector of the panel module, then
lift up the bracket and put it on a protective cushion.
