4. Disassembly and Assembly Procedures
Use a Philips-head screwdriver to remove 6pcs
screws for unlocking the middle bezel with the front
bezel. Use a Philips-head screwdriver to remove
13pcs screws for unlocking the middle bezel with the
panel module. tear off 2pcs tapes of the power cable.
(No.1~6 Screw size=M2x3.8,Torque=3
±
0.5kgfxcm;
No.7~19 Screw size=M3x5, Torque=3~4kgfxcm)
2
3
4
1
U
.
se a Philips-head screwdriver to remove 4pcs
screws for locking the bracket chassis module with
the panel
(No.1~4 Screw size= M3x0.5x2.8, Torque=5
~6
kgfxcm)
Move the bracket, and then disconnect the LVDS
cable and panel lamp cable from the connectors of
the panel module, then lift up the bracket and put it
on a protective cushion.
S7
S8
S9
Lift up the panel module and pull out the front bezel
for releasing the front bezel.
S11
Remove the middle bezel and put it into a fixture jip,
then tear off the black PVC tape and use
a Philips-
head screwdriver to remove 1pcs screw for unlocking
the power key board with the front bezel.
(No.1 Screw size= M2x2.4, Torque=0.8
±0.2
kgfxcm)
S10
1