manualshive.com logo in svg

Dell QLogic QL45212, Руководство пользователя, Страница: 23 / 101

Поделиться
Скачать
Dell QLogic QL45212 Скачать руководство пользователя страница 23

8

BC0154503-00  B

3

Installing Drivers

This chapter provides information about the following topics:

Linux Driver Software

Windows Driver Software

VMware Driver Software

Linux Driver Software

This section describes how to install Linux drivers with or without RoCE. It also 
describes the Linux driver optional parameters, default values, messages, and 
statistics.

Installing the Linux Drivers without RoCE

Installing the Linux Drivers with RoCE

Linux Driver Optional Parameters

Linux Driver Parameter Defaults

Linux Driver Messages

Statistics

The QL45212 Adapter Linux drivers and supporting documentation are available 
at 

dell.support.com

.

Table 3-1

 describes the QL45212 Adapter Linux drivers.

Table 3-1. QLogic QL45212 Linux Drivers 

Linux 

Driver

Description

qed

The Linux core module manages all PCI device resources (registers, host 
interface queues, and so on). The qed core module directly controls the 
firmware, handles interrupts, and is the interface for the qede driver. The 
qed core module requires Linux kernel version 2.6.32 or later. Testing was 
concentrated on the x86_64 architecture.

Содержание QLogic QL45212






































































































Отзывы:

Нет отзывов