Dell PS Series, Инструкция по установке и настройке, Страница: 14 / 51

Installation and Setup Installing a PS4000 Array
2–4
Installing a PS4000 Array
Figure 2-2 shows the front view of a PS4000 array, which is a 3U array with 16
drive slots, two power supply and cooling modules, and two control modules of
the same type; either two Type 8 or two Type 9 control modules.
Figure 2-3 shows the rear view, with two Type 8 control modules.
Figure 2-2: PS4000 Array - Front View (without Bezel)
Figure 2-3: PS4000 Array - Rear View
Before You Begin
You must meet these prerequisites before installing a PS4000 array:
• Make sure the array and installation location meet the environmental
requirements. See Environmental Requirements on page 2-5.
• Gather all the required hardware. See Shipping Box Contents and Required
Hardware on page 2-6.
• Rack mount the array. See Rack Mount Requirements on page 2-7.