Dell Precision T5500 Скачать руководство пользователя страница 1

Страница: 1 / 80

Dell Precision™ T5500 Service Manual

Notes, Cautions, and Warnings

If you purchased a Dell™ n Series computer, any references in this document to Microsoft®

Windows

operating systems are not applicable.

Information in this document is subject to change without notice.

Reproduction of this material in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden.

Trademarks used in this text:

Dell

, the

DELL

logo, and

Dell Precision

are trademarks of Dell Inc.;

Intel

and

Xeon

are registered trademarks of Intel Corporation;

Bluetooth

is a

registered trademark owned by Bluetooth SIG, Inc. and is used by Dell under license;

Blu-ray Disc

is a trademark of the Blu-ray Disc Association;

Microsoft

Windows, Windows

Server, MS-DOS, Aero, Windows Vista

and the

Windows Vista

start button

are either trademarks or registered trademarks of Microsoft Corporation in the United States and/or other

countries.

Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Dell Inc. disclaims any
proprietary interest in trademarks and trade names other than its own.

Model DCTA

September 2009 Rev. A01

Working on Your Computer

Adding and Replacing Parts

Specifications

Diagnostics

About Memory

About Your System Board

System Setup

NOTE:

A NOTE indicates important information that helps you make better use of your computer.

CAUTION:

A CAUTION indicates potential damage to hardware or loss of data if instructions are not followed.

WARNING:

A WARNING indicates a potential for property damage, personal injury, or death.

Содержание Precision T5500

















































































Результаты поиска

Содержание Precision T5500

Отзывы:

Похожие инструкции для Precision T5500

Бренды по названию

Популярные бренды

Dell Precision T5500, Руководство по обслуживанию

Результаты поиска

Содержание Precision T5500

Отзывы:

Похожие инструкции для Precision T5500

Бренды по названию

Популярные бренды