Dell Precision M4300 Скачать руководство пользователя страница 16

Страница: 16 / 42

Starting from the sides of the display panel, use your fingers to separate the bezel from the top cover and lift the bezel away from the top cover.

Removing the Display Panel

Follow the procedures in

Before You Begin

Remove the display assembly (see

Removing the Display Assembly

Remove the display bezel (see

Removing the Display Bezel

Remove the eight M2.5 x 5-mm screws from the display panel.

Lift the display panel out of the top cover.

Installing the Display Panel

Replace the eight M2.5 x 5-mm screws that secure the display panel to the top cover.

Route the display feed-flex cable and antenna cables so that they rest in the notch located in the bottom edge of the top cover.

Replace the display bezel .

Removing the Display Panel Brackets

Follow the procedures in

Before You Begin

Remove the display assembly (see

Removing the Display Assembly

Remove the display bezel (see

Removing the Display Bezel

Remove the display panel (see

Removing the Display Panel

Remove the four M2 x 3-mm screws from the right display panel side bracket and lift away the bracket.

CAUTION:

Before performing the following procedures, follow the safety instructions in the Product Information Guide.

NOTICE:

To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching a connector on the back panel of

the computer.

M2 x 3-mm screws (8)

display panel

top cover

CAUTION:

Before performing the following procedures, follow the safety instructions in the Product Information Guide.

NOTICE:

To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching a connector on the back panel of

the computer.

Содержание Precision M4300











































Результаты поиска

Содержание Precision M4300

Отзывы:

Похожие инструкции для Precision M4300

Бренды по названию

Популярные бренды

Dell Precision M4300, Руководство по обслуживанию

Результаты поиска

Содержание Precision M4300

Отзывы:

Похожие инструкции для Precision M4300

Бренды по названию

Популярные бренды