Dell Precision 3510, Руководство по обслуживанию

Страница: 72 / 78

Steps
1. Place the display assembly on a clean and flat surface.
2. Align and place the palmrest and keyboard assembly on the display assembly.
3. Using the alignment posts, close the display hinges.
4. Connect the display cable to the system board and adhere the tape to secure the display cable.
5. Place the EDP metal bracket on the display cable connector.
6. Install the six (M2.5x5) screws that secure the display hinges to the chassis of your computer.
Next steps
1. Install the battery .
2. Install the base cover .
3. Install the SD card .
4. Follow the procedure in After working inside your computer .
Palmrest assembly
Removing the Palmrest Assembly
Prerequisites
1. Follow the procedure in before working inside your computer .
2. Remove the SD card .
3. Remove the base cover .
4. Remove the battery .
5. Remove the WLAN card .
72 Disassembly and reassembly