Dell PowerVault MD3000 Скачать руководство пользователя страница 9

Страница: 9 / 102

About Your System

•

Dell PowerEdge Cluster Documentation is available at

support.dell.com

. A link to clustering

documentation is also included on the

Resource CD

under

Product Documentation

•

Updates are sometimes included to describe changes to the

enclosure

, software, and/or

documentation.

NOTE:

Always check for updates on

support.dell.com

and read the updates first because they often

supersede information in other documents.

•

Release notes or readme files are included to provide last-minute updates to the

enclosure

documentation or advanced technical reference material intended for experienced users or
technicians.

Hardware Features

The remainder of this section describes the hardware features available on the RAID enclosure,
including:

•

Indicators on the enclosure bezel

•

Front-panel and back-panel indicators and features

•

Power supply and cooling fan modules

Indicators on the Enclosure Bezel

An optional locking bezel can be installed on the front of the enclosure to limit access.

Figure 1-1

illustrates the indicators and components on the bezel. Table 1-1 lists conditions indicated by the lights on
the bezel.

For information on installing and removing the bezel, see "Removing and Replacing the Front

Bezel" on page 47.

Figure 1-1.

LEDs on the Front Bezel

Содержание PowerVault MD3000







































































































Результаты поиска

Содержание PowerVault MD3000

Отзывы:

Похожие инструкции для PowerVault MD3000

Бренды по названию

Популярные бренды

Dell PowerVault MD3000, Руководство владельца оборудования

Результаты поиска

Содержание PowerVault MD3000

Отзывы:

Похожие инструкции для PowerVault MD3000

Бренды по названию

Популярные бренды