Dell PowerVault 110T DLT1 Скачать руководство пользователя страница 14

Страница: 14 / 15

Media Migration

Disk Group(s) from other systems (e.g., another Dell PowerEdge
Server with attached storage enclosures) may be migrated to a
PowerVault DL Appliance.

Perform the following steps to migrate a Disk Group from one
system to a targeted PowerVault DL Appliance:

Determine the Disk Group for migration.

Power down the system that owns the Disk Group,

including the server and all attached MD1000 Storage
Enclosures.
Remove the physical disks for the Disk Group to be

migrated .
On the target PowerVault DL Appliance, set the

Disk

Configuration Policy

Manual

via the

Appliance

Management Console.

Install the physical disks of the migrated Disk Group in to

the MD1000 Storage Enclosure connected to the target
PowerVault DL Appliance.

Note:

If the goal is to keep the Disk Configuration State as

Standard,

the migrated Disk Group must occupy Slots 1-7 or

Slots 8-14 in the new MD1000 Storage Enclosure. The optional
hot spare should be installed in Slot 0.

From the target PowerVault DL Appliance Console,

launch Dell’s OpenManage Server Administrator (OMSA)
tool. Import the migrated Disk Group(s) using OMSA.
Refer to the Dell OpenManage Server Administrator
(OMSA) User Guide for specific steps.

Note:

Use the OMSA procedure for importing foreign

configurations. If importing the foreign configurations fails, issue

Содержание PowerVault 110T DLT1
















Результаты поиска

Содержание PowerVault 110T DLT1

Отзывы:

Похожие инструкции для PowerVault 110T DLT1

Бренды по названию

Популярные бренды

Dell PowerVault 110T DLT1, Руководство пользователя

Результаты поиска

Содержание PowerVault 110T DLT1

Отзывы:

Похожие инструкции для PowerVault 110T DLT1

Бренды по названию

Популярные бренды