Table 12. Data Manager Appliance Configuration UI error messages (continued)
Error code
Error message
Troubleshooting steps
CONN0142
Time difference <
integer_value
>
between <
NTP_server
> and <
operating
environment
> exceeded the maximum
allowed difference of 600 seconds.
●
Ensure that the correct time is set on the NTP server.
●
Click
Back
and re-submit the configuration.
●
If the issue persists, contact Dell Customer Support.
CONN0149
Destination subnet IP <
IP_x
> does not match
with its network IP <
IP_y
> .
●
Enter the appropriate subnet for your network.
●
If the issue persists, contact Dell Customer Support.
CONN0157
IP <
IP
> is supposed to be free but it is
detected in use.
●
Enter an IP address that is not in use.
●
If the issue persists, contact Dell Customer Support.
CONN0158
Management IP <
IP_x
> resolution <
IP_y
>
does not not match with given Management
FQDN <
Management_FQDN
>.
●
Provide correct FQDN entry in the input field.
●
If the issue persists, contact Dell Customer Support.
CONN0159
Given Management FQDN
<
Management_FQDN
> does not ends with
domain name <
domain_name
>.
●
Provide correct FQDN and domain name in the input field.
●
If the issue persists, contact Dell Customer Support.
CONN0161
IP <
IP
> is supposed to be free but it is
detected in use.
●
Enter an IP address that is not in use.
●
If the issue persists, contact Dell Customer Support.
CONN0163
Failed to validate if network is already in use.
●
Ensure the network is not already added.
●
Once the problem is resolved, add the configuration again.
●
If the issue persists, contact Dell Customer Support.
CONN0164
Unable to reach to NTP server
<
NTP_server_IP
>.
●
Check if the NTP server is reachable
●
Check if NTP services are running on the NTP server.
●
Check the firewall rules.
●
Click
Back
and re-submit the configuration.
●
If the issue persists, contact Dell Customer Support.
a.
Reverse DNS lookup uses an IP address to find a domain name. Forward DNS lookup uses a domain name to find an IP
address.
Troubleshooting
49
