Dell PowerEdge SC1420, Руководство пользователя

Страница: 12 / 132

10
Information Update
www
.dell.com | support.dell.com
SATA Operation
( RAID On default)
Determines the integrated SATA controller’s operating mode. RAID On enables
RAID support. RAID Off disables RAID support.
NOTICE:
When using a SCSI RAID add-in controller card, set the integrated
SATA controller’s operating mode to RAID Off .
SMART Reporting
( Off default)
Determines whether hard-drive errors for internal drives are reported during
system startup.
Off does not report errors. On reports errors.
Table 1-4. Onboard Devices Options
Option Description
Integrated NIC
( On default)
Enables or disables the integrated NIC controller. Off disables the controller.
On enables the controller.
NOTE:
PXE or RPL is required only if you are booting to an operating system on
another system; not if you are booting to an operating system on a hard drive in
this system.
USB
( On default)
Enables or disables the internal USB controller. Off disables the controller. On
enables the controller. No Boot enables the controller but disables the ability
to boot from a USB device.
LPT Port Mode
( PS/2 default)
Determines the mode of operation of the internal parallel port. Off disables the
port. AT configures the port for IBM AT compatibility. PS/2 configures the port
for IBM PS/2 compatibility. EPP configures the port for the EPP bidirectional
protocol. ECP configures the port for the ECP bidirectional protocol.
If you set the LPT Port Mode to ECP , the LPT Port DMA option appears
in the option menu.
LPT Port Address
( 378 default)
Determines the address that the built-in parallel port uses.
Serial Port (#1 or #2)
( Auto default)
Serial Port 1 options are COM1 , COM3 , Auto , and Off .
Serial Port 2 options are COM2 , COM4 , Auto , and Off .
When serial port 1 or 2 is set to Auto , the integrated port automatically maps
to the next available port. Serial port 1 attempts to use COM1 first and then
COM3 . Serial port 2 attempts to use COM2 first and then COM4 . If both
addresses are in use for a specific port, the port is disabled.
If you set the serial port to Auto and add an expansion card with a port
configured to the same designation, the system automatically remaps the
integrated port to the next available port designation that shares the same
IRQ setting.
PS/2 Mouse Port
( On default)
Enables or disables the integrated PS/2-compatible mouse controller.
Off disables the controller. On enables the controller.
Table 1-3. Drive Options (continued)
Option Description