Dell PowerEdge R815 Скачать руководство пользователя страница 14

14

About Your System

LCD Panel Features 

The system's LCD panel provides system information and status and error 
messages to signify when the system is operating correctly or when the system 
needs attention. See "LCD Status Messages" on page 22 for information 
about specific status codes.

The LCD backlight lights blue during normal operating conditions and lights 
amber to indicate an error condition. When the system is in standby mode, 
the LCD backlight is off and can be turned on by pressing the Left, Select, or 
Right button on the LCD panel. The LCD backlight remains off if LCD 
messaging is turned off through the iDRAC6 utility, the LCD panel, or other 
tools.

Figure 1-2.

LCD Panel Features

9

Optical drive 
(optional)

One optional slim-line SATA 
DVD-ROM drive or DVD-RW drive.

NOTE: 

DVD devices are data only.

10

Hard drives 

Up to six 2.5 inch, external hot-
swappable SAS, SATA, or SSD hard 
drives.

Item

Indicator, Button, or 
Connector

Icon

Description

4

3

2

1

book.book  Page 14  Wednesday, February 17, 2010  6:17 PM

Содержание PowerEdge R815































































































































































































Отзывы: