6
Enter
System Setup
again.
7
On the
System Setup Main Menu
screen, click
System BIOS
>
System Security Settings
.
8
Select the
TPM Advanced Settings
option.
9
From the
TPM2 Algorithm Selection
option, select
SHA256
, then go back to
System Security Settings
screen.
10 On the
System Security Settings
screen, from the
Intel TXT
option, select
On
.
11 Save the settings.
12 Restart your system.
rSPI card
restore Serial Peripheral Interface (rSPI) is a SPI flash device to store information about the system Service Tag, system configuration, or
iDRAC license.
Removing the rSPI card
Prerequisites
1
Follow the safety guidelines listed in
2
Follow the procedure listed in
Before working inside your system
.
3
Remove the system board.
Steps
1
Using the Torx #4 screwdriver, remove the screw securing the rSPI card to the system board.
2
Holding the rSPI card by its edges, lift the card away from the system.
CAUTION:
To prevent damage to the rSPI card, you must not tilt the card while lifting it from the system board.
Figure 51. Removing the rSPI card
Installing and removing system components
99
