●
You cannot disable or change an existing system password.
NOTE:
You can use the password status option with the setup password option to protect the system password from
unauthorized changes.
Related references
on page 44
System Information
You can use the
System Information
screen to view system properties such as Service Tag, system model name, and the BIOS
version.
Related references
on page 48
on page 38
Related tasks
Viewing System Information
To view the
System Information
screen, perform the following steps:
Steps
1. Turn on, or restart your system.
2. Press F2 immediately after you see the following message:
F2 = System Setup
NOTE:
If your operating system begins to load before you press F2, wait for the system to finish booting, and then
restart your system and try again.
3. On the
System Setup Main Menu
screen, click
System BIOS
.
4. On the
System BIOS
screen, click
System Information
.
Related references
on page 48
System Information details
About this task
The
System Information
screen details are explained as follows:
Option
Description
System Model
Name
Specifies the system model name.
System BIOS
Version
Specifies the BIOS version installed on the system.
System
Management
Engine Version
Specifies the current version of the Management Engine firmware.
48
Pre-operating system management applications
