Dell PowerEdge E31S Series, Руководство пользователя

Страница: 44 / 202

Viewing UEFI iSCSI Settings
To view the UEFI iSCSI Settings screen, perform the following steps:
Steps
1. Turn on, or restart your system.
2. Press F2 immediately after you see the following message:
F2 = System Setup
NOTE: If your operating system begins to load before you press F2, wait for the system to finish booting, and then
restart your system and try again.
3. On the System Setup Main Menu screen, click System BIOS .
4. On the System BIOS screen, click Network Settings .
5. On the Network Settings screen, click UEFI iSCSI Settings .
Related references
UEFI iSCSI Settings on page 43
UEFI iSCSI Settings details
The UEFI ISCSI Settings screen details are explained as follows:
Option Description
ISCSI Initiator
Name Specifies the name of the iSCSI initiator (iqn format).
ISCSI Device n (n
= 1 to 4) Enables or disables the iSCSI device. When disabled, a UEFI boot option is created for the iSCSI device
automatically.
System Security
You can use the System Security screen to perform specific functions such as setting the system password, setup password
and disabling the power button.
Related references
Operating with a setup password enabled on page 47
System BIOS on page 38
Related tasks
System Security Settings details on page 45
Viewing System Security on page 44
Creating a system and setup password on page 46
Using your system password to secure your system on page 47
Deleting or changing system and setup password on page 47
Viewing System Security
To view the System Security screen, perform the following steps:
Steps
1. Turn on, or restart your system.
44 Pre-operating system management applications