Dell POWEREDGE E11S Скачать руководство пользователя страница 28

Страница: 28 / 130

Using the System Setup Program and Boot Manager

SATA Settings Screen

Processor Family-Model-

Stepping

Displays the processor family and model.

Level 2 Cache

Displays the level 2 cache size.

Level 3 Cache

Displays the level 3 cache size.

Number of Cores

Displays the number of cores of the processor.

Logical Processor

(

Enabled

default)

On processors that support Simultaneous Multi-

Threading (SMT) technology, each processor core

supports up to two logical processors. If this field is set to

Enabled

, the BIOS reports both logical processors. If set

Disabled

, only one logical processor is monitored by

the BIOS.

Virtualization Technology

(

Disabled

default)

Enabled

permits virtualization software to use the

virtualization technology incorporated in the processor.

NOTE:

Disable this feature if your system will not be

running virtualization software.

Execute Disable

(

Enabled

default)

Enables or disables Execute Disable Memory Protection

Technology.

Number of Cores per

Processor

(

All

default)

If set to

All

, the maximum number of cores in each

processor is enabled.

Turbo Mode

(

Enabled

default)

If Turbo Boost technology is supported by the processor,

enables or disables

Turbo Mode

C States

(

Enabled

default)

When set to

Enabled

, the processor can operate in all

available power states.

Option

Description

Embedded SATA

(

AHCI

default)

Allows the embedded SATA to be set to

Off

ATA

AHCI

RAID

modes.

Port A

(

Auto

default)

Auto

enables BIOS support for the device attached to

SATA port A.

Off

disables BIOS support for the device.

Port B

(

Off

default)

Auto

enables BIOS support for the device attached to

SATA port B.

Off

disables BIOS support for the device.

Option

Description

Содержание POWEREDGE E11S



































































































































Результаты поиска

Содержание POWEREDGE E11S

Отзывы:

Dell POWEREDGE E11S, Руководство пользователя, Страница: 28 / 130

Результаты поиска

Содержание POWEREDGE E11S

Отзывы: