Dell PowerEdge 2650, Руководство по установке, Страница: 14 / 184

1-8
Ra c k I n s t a l l a t i o n G u i d e
www
.dell.com | support.dell.com
F i g u r e 1 - 4 . M a r k i n g t h e V e r t i c a l R a i l s
Installing the RapidRails Slide Assemblies
1
At the front of the rack cabinet, position one of the RapidRails slide assemblies so that
its mounting-bracket flange fits between the marks or tape you placed on the rack (see
Figure 1-5).
The top mounting hook on the slide assembly’s front mounting bracket flange should
enter the top hole between the marks you made on the vertical rails.
2
Push the slide assembly forward until the top mounting hook enters the top square
hole that you placed a mark just above on the vertical rail, and then push down on the
mounting-bracket flange until the mounting hooks seat in the square holes and the
push button pops out and clicks (see Figure 1-5).
tape on
vertical rail