Dell_Networking_W_AP92_93 page 2
Specifications
Operating mode
• Multiservice concurrent 802.11a/n or b/g/n WLAN
• Can be configured to operate individually or simultaneously as:
- 802.11a/b/g/n access point
- Air monitor, spectrum monitor
- Remote AP
- Secure enterprise mesh
• Backward compatible with 802.11a/b/g and mixed-mode
11a/b/g/n deployments
Radios
• Multifunction, single radio capable of 2.4-GHz or 5-GHz operation
• 802.11n radio implements 2x2 MIMO with 2 spatial streams,
providing up to 300 Mbps data rate
• Maximal ratio combining (MRC) for improved receiver performance
Wireless radio specifications
• AP type: Single radio, dual-band 802.11n indoor
• Supported frequency bands (country-specific restrictions apply):
- 2.400 to 2.4835 GHz
- 5.150 to 5.250 GHz with Dynamic Frequency Support (DFS)
Capability
- 5.250 to 5.350 GHz with Dynamic Frequency Support (DFS)
Capability
- 5.470 to 5.725 GHz with Dynamic Frequency Support (DFS)
Capability
- 5.725 to 5.850 GHz with Dynamic Frequency Support (DFS)
Capability
• Available channels: Controller-managed, dependent upon
configured regulatory domain
• Transmit power:
- 2.4 GHz: Up to 23 dBm (limited by local regulatory
requirements)
- 5 GHz: Up to 23 dBm (limited by local regulatory
requirements)
- Transmit power configurable in increments of 0.5 dBm
• Supported radio technologies:
- 802.11b: Direct-sequence spread-spectrum (DSSS)
- 802.11a/g/n: Orthogonal frequency division multiplexing
(OFDM)
- 802.11n: 2x2 MIMO with 2 spatial streams
• Supported modulation types:
- 802.11b: BPSK, QPSK, CCK
- 802.11a/g/n: BPSK, QPSK, 16-QAM, 64-QAM
• Association rates (Mbps):
- 802.11b: 1, 2, 5.5, 11
- 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54
- 802.11n: MCS0 - MCS15 (6.5 Mbps to 300 Mbps)
- 802.11n high-throughput (HT) support: HT 20/40
- 802.11n packet aggregation: A-MPDU, A-MSDU
Antenna
• W-AP92: dual, RP-SMA interfaces for external antenna support
(Supports up to 2x2 MIMO with spatial diversity. External
Antenna selection guide is available from Dell representative or
downloadable from Dell.com/wireless)
• W-AP93: two integrated, omni-directional antennas (supporting
up to 2x2 MIMO with spatial diversity)
- 2.4 GHz/2.5 dBi
- 5 GHz/5.8 dBi
Interfaces
• Network:
- 1 x 10/100/1000Base-T Ethernet (RJ45), auto-sensing,
MDI/MDX
• Power:
- 1 x DC power connector
• Other:
- 1 x RJ45 console interface
Power options
• 48V DC 802.3af PoE or 802.3at PoE+
• External AC power providing 12V DC to AP (adapter sold
separately)
• Maximum power consumption: 10 watts
Mounting
• Wall Mount
• Ceiling tile rail (15/16” & 9/16” recessed or non-recessed)
Mechanical
• 120 mm x 130 mm x 35 mm (4.7” x 5.1” x 1.4”)
• Weight: 375 g (13.2 oz)
Environmental
• Operating:
- Temp: 0° to 50° C (32° to 122° F)
- Humidity: 5 to 95% non-condensing
• Storage and Transportation:
- Temp: -40° to 70° C (-40° to 158° F)
Certifications/Regulatory
• Wi-Fi certified 802.11a/b/g/n
• FIPS/TAA certified SKU available
Product meets EMC, safety and wireless standards of over 50
countries inclusive of; USA (FCC), Canada, EU, Japan, Korea,
China. For more country-specific regulatory information, and ap-
provals, please see your Dell representative.
Minimum OS version
• 5.0.2.0
Extended Life Warranty*
