Dell PowerConnect 8024, Руководство по настройке пользователя

Страница: 1013 / 1294

Configuring OSPF and OSPFv3
1013
console(config)# router ospf
console(config-router)# router-id 3.3.3.3
console(config-router)# exit
Switch B is a ABR that connects Area 0 to Areas 1 and 2.
To configure Switch B:
1
Configure IPv6 and IPv4 routing. The static routes are included for
illustration only: Redistributed static routes, like routes distributed from
other protocols, are not injected into stub areas such as Area 1:
console#
configure
console(config)#
ipv6 unicast-routing
console(config)#
ipv6 route 3000:44:44::/64
3000:2:3::210:18ff:fe82:c14
console(config)#
ip route 10.23.67.0 255.255.255.0
10.2.3.3
2
Create VLANs 5, 10, and 17.
console(config)# vlan 5,10,17
3
On VLANs 5, 10, and 17, configure IPv4 and IPv6 addresses and enable
OSPFv3. For IPv6, associate VLAN 5 with Area 0, VLAN 10 with Area 1,
and VLAN 17 with Area 2.
console(config)# interface vlan 5
console(config-if-vlan5)# ip address 10.2.3.2
255.255.255.0
console(config-if-vlan5)# ipv6 address
3000:2:3::/64 eui64
console(config-if-vlan5)# ipv6 ospf
console(config-if-vlan5) #ipv6 ospf areaid 0
console(config-if-vlan5)# exit
console(config)# interface vlan 10
console(config-if-vlan10)# ip address 10.1.2.2
255.255.255.0
console(config-if-vlan10)# ipv6 address
3000:1:2::/64 eui64
console(config-if-vlan10)# ipv6 ospf
console(config-if-vlan10)# ipv6 ospf areaid 1
console(config-if-vlan10)# exit