Dell PowerConnect 35 SERIES, Руководство пользователя

Страница: 308 / 474

308
Configuring Switch Information
The following is an example of the CLI commands:
Enabling Storm Control
A Broadcast Storm is a result of an excessive amount of Broadcast messages simultaneously transmitted
across a network by a single port. Forwarded message responses are heaped onto the network, straining
network resources or causing the network to time out.
Storm Control is enabled per port by defining the packet type and the rate the packets are transmitted.
The system measures the incoming Broadcast, Unicast, and Multicast frame rate separately on each port,
and discard frames when the rate exceeds a user-defined rate.
console(config)# interface port-channel 2
console(config-if)# no negotiation
console(config-if)# speed 100
console(config-if)# flowcontrol on
console(config-if)# exit
console(config)# interface port-channel 3
console(config-if)# shutdown
console(config-if)# exit
console(config)# interface port-channel 4
console(config-if)#
back-pressure
console(config-if)# description p4
console(config-if)# end
console# show interfaces port-channel
Channel Ports
--------- ---------
ch1 Inactive: 1/e(11-13)
ch2 Active: 1/e14