3. Install the
4. Follow the procedure in
after working inside your computer
Heat sink
Removing the heatsink - UMA
Prerequisites
1. Follow the procedure in
before working inside your computer
2. Remove the
3. Remove the
4. Remove the
5. Remove the
6. Remove the
Steps
1. Loosen the four captive screws that secure the heatsink to the system board [1].
NOTE:
Loosen the screws in the order of the callout numbers [1, 2, 3, 4] as indicated on the heatsink.
2. Lift the heatsink off the system board [2].
Installing the heatsink - UMA
Steps
1. Place the heatsink on the system board and align the screw holes on the heatsink with the screw holes on the system board [1].
2. In sequential order (as indicated on the heatsink), tighten the four captive screws that secure the heatsink to the system board [2].
38
Disassembly and reassembly
Содержание P89G
Страница 1: ...Vostro 3481 Service Manual Regulatory Model P89G Regulatory Type P89G004 ...
Страница 44: ...3 Lift the speakers along with the cable off the palm rest and keyboard assembly 44 Disassembly and reassembly ...
Страница 56: ...7 After performing all the preceding steps you are left with display assembly 56 Disassembly and reassembly ...
