Dell P82G, Руководство по обслуживанию

Страница: 21 / 79

Removing the solid-state drive
NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in Before working inside your computer . After working inside your computer, follow the instructions in After
working inside your computer . For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance .
CAUTION: Solid-state drives are fragile. Exercise care when handling the solid-state drive.
CAUTION: To avoid data loss, do not remove the solid-state drive while the computer is in sleep or on state.
Prerequisites
1. Remove the base cover .
2. Remove the battery .
Procedure to remove M.2 2280 and M.2 2230 solid-
state drives
Procedure to remove M.2 2280 solid-state drive
1. Remove the screw (M2x3) that secures the solid-state drive shield and the solid-state drive to the system board.
2. Slide and remove the solid-state drive shield from the solid state drive slot.
3. Lift the solid-state drive at an angle, then slide and remove the solid-state drive from the solid-state drive slot.
NOTE: The 2280 solid-state drive has a unique thermal plate and cannot be interchanged with the 2230 solid-state
drive thermal plate.
7
Removing the solid-state drive 21