3
Check to see whether the access point responds:
•
If the access point responds, you will see several lines appear that start with “Reply from.”
It is possible that the printer did not connect to the wireless network. Turn off and then restart the printer
to try to connect again.
•
If the access point does not respond, it will take several seconds and then you will see “Request timed out.”
Try the following:
a
Click
, or click
Start
and then click
Run
.
b
In the Start Search or Run box, type
ncpa.cpl
, and then press
Enter
.
c
Press
Enter
or click
OK
.
d
Select the appropriate connection from the ones shown.
e
Right-click the connection, and then click
Repair
.
M
AKE
SURE
YOUR
COMPUTER
CAN
COMMUNICATE
WITH
THE
PRINTER
1
Obtain the printer IP address by printing a network setup page.
2
Click
, or click
Start
and then click
Run
.
3
In the Start Search or Run box, type
cmd
.
4
Press
Enter
, or click
OK
.
The Command Prompt window opens.
5
Type
ping
followed by a space and the IP address of the printer. For example:
ping 192.168.1.100
6
Press
Enter
.
7
If the printer responds, you will see several lines that display the number of bytes received from the printer.
This ensures that your computer is communicating with your printer.
If the printer does not respond, then “Request timed out” displays.
•
Your computer might not be connected to the network.
•
You may need to change the settings of your printer. Run the Wireless Setup Utility again.
C
ONFIGURE
THE
PRINTER
FOR
WIRELESS
ACCESS
AGAIN
If your wireless settings have changed, you must run the printer wireless setup again. Some reasons your settings
may have changed include your having manually changed your WEP or WPA keys, channel, or other network
settings; or the access point having been reset to factory defaults.
Running the wireless setup again can also resolve issues due to misconfigurations that occurred when configuring
the printer for wireless access.
Notes:
•
If you change network settings, change them on all the network devices before changing them for the access
point.
•
If you have already changed the wireless network settings on your access point, then you must change the
settings on all the other network devices before you can see them on the network.
1
Click
or
Start
.
2
Click
All Programs
or
Programs
, and then select the printer program folder from the list.
Troubleshooting
114