Safety instructions
Use the following safety guidelines to protect your computer from potential damage
and ensure your personal safety.
WARNING:
Before working inside your computer, read the safety information
that shipped with your computer. For more safety best practices, see the
Regulatory Compliance home page at www.dell.com/regulatory_compliance.
WARNING:
Disconnect all power sources before opening the computer cover
or panels. After you finish working inside the computer, replace all covers,
panels, and screws before connecting to the electrical outlet.
CAUTION:
To avoid damaging the computer, ensure that the work surface is
flat and clean.
CAUTION:
To avoid damaging the components and cards, handle them by
their edges, and avoid touching pins and contacts.
CAUTION:
You should only perform troubleshooting and repairs as authorized
or directed by the Dell technical assistance team. Damage due to servicing
that is not authorized by Dell is not covered by your warranty. See the safety
instructions that shipped with the product or at www.dell.com/
regulatory_compliance.
CAUTION:
Before touching anything inside your computer, ground yourself by
touching an unpainted metal surface, such as the metal at the back of the
computer. While you work, periodically touch an unpainted metal surface to
dissipate static electricity, which could harm internal components.
CAUTION:
When you disconnect a cable, pull on its connector or on its pull
tab, not on the cable itself. Some cables have connectors with locking tabs or
thumb-screws that you must disengage before disconnecting the cable. When
disconnecting cables, keep them evenly aligned to avoid bending any
connector pins. When connecting cables, ensure that the ports and
connectors are correctly oriented and aligned.
CAUTION:
Press and eject any installed card from the media-card reader.
Recommended tools
The procedures in this document may require the following tools:
Before working inside your computer
9
Содержание P56F
