manualshive.com logo in svg

Dell P2722H, Руководство пользователя

Поделиться
Скачать
Dell P2722H Скачать руководство пользователя страница 64

64

   

  |       Operating the monitor

If adjust the Brightness level above the default level over 75%, the following message 
will appear:

Adjusting to this value will increase power consumption above the default level.  

Do you want to continue?

Yes

No

• 

 When user selects “Yes”, the power message is displayed only once.

• 

 When user select ‘No’, the power warning message will pop-up again.

• 

The power warning message will appear again only when the user does a Factory 
Reset from the OSD menu.

If either VGA, DP, HDMI input is selected and the corresponding cable is not 
connected, a floating dialog box as shown below appears.

No VGA Cable

The display will go into Standby mode in 4 minutes.

www.dell.com/P2722H

 or

No DP Cable

The display will go into Standby mode in 4 minutes.

www.dell.com/P2722H

or

No HDMI Cable

The display will go into Standby mode in 4 minutes.

www.dell.com/P2722H

See 

Troubleshooting

 for more information.

Содержание P2722H










































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды