manualshive.com logo in svg

Dell P2722H, Руководство пользователя

Поделиться
Скачать
Dell P2722H Скачать руководство пользователя страница 62

62

   

  |       Operating the monitor

OSD warning messages

When the monitor does not support a particular resolution mode, you can see the 
following message:

The current input timing is not supported by the monitor display.

Please change your input timing to 1920x1080, 60Hz or any other 

monitor listed timing as per the monitor specifications.

This means that the monitor cannot synchronize with the signal that it is receiving 
from the computer. See 

Monitor Specifications

 for the Horizontal and Vertical 

frequency ranges addressable by this monitor. Recommended mode is 1920 x 1080.
You can see the following message before the DDC/CI function is disabled:

The function of adjusting display setting using PC 

application will be disabled.

Do you wish to disable DDC/CI function?

Yes

No

When the monitor enters the 

Standby

 mode, the following message will appear:

Going into Standby mode...

Activate the computer and wake up the monitor to gain access to the 

OSD

.

If you press any button other than the power button, the following messages will 
appear depending on the selected input:

No HDMI Signal form your device.

Press any key on the keyboard or move the mouse to wake it up. 

If there is no display, press monitor joystick to open up the

Menu and select the correct input source.

Содержание P2722H










































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды