Dell P2423DE Скачать руководство пользователя страница 59

Страница: 59 / 94

Operating the monitor

│

Accessing the menu system

NOTE: If you change the settings and then either proceed to another

menu or exit the OSD menu, the monitor automatically saves those
changes. The changes are also saved if you change the settings and
then wait for the OSD menu to disappear.

Select the

icon to launch the OSD and display the main menu.

Brightness/Contrast

Input Source

2X Monitor

Color

Display

Personalize

Others

Exit

75%

Press the and directions to move between the setting options. As you
move from one icon to another, the option is highlighted.

Press the or directions once to activate the highlighted option.

NOTE: NOTE: The directional buttons (and the OK button) displayed

may differ according to the menu you’ve selected. Use available
buttons to make your selection.

Press and directions to select the desired parameter.

Press and then use the and directions, ccording to the indicators on
the menu, to make your changes.

Select the to return to the main menu.

Содержание P2423DE































































































Результаты поиска

Содержание P2423DE

Отзывы:

Похожие инструкции для P2423DE

Бренды по названию

Популярные бренды

Dell P2423DE, Руководство пользователя

Результаты поиска

Содержание P2423DE

Отзывы:

Похожие инструкции для P2423DE

Бренды по названию

Популярные бренды