*[P2010H] color gamut (typical) is based on CIE1976 (83%) and CIE1931 (72%) test standards.
Resolution Specifications
Supported Video Modes
Preset Display Modes
Electrical Specifications
Physical Characteristics
Screen dimensions
20 inches (20-inch viewable image size)
Preset display area:
442.8(H) X 249.1(V)
Horizontal
442.8(H) mm (17.4 inches)
Vertical
249.1(V) mm (9.8 inches)
Pixel pitch
0.277 mm
Viewing angle
160° (vertical) typical, 170° (horizontal) typical
Luminance output
250 CD/m
²
(typical)
Contrast ratio
1000 to 1 (typical), 10000 to 1 (typical Dynamic Contrast On)
Faceplate coating
Antiglare with hard-coating 3H
Backlight
2-CCFL edgelight system
Response Time
5ms panel typical
Color depth
16.7 million colors
Color Gamut
83%*
Horizontal scan range
30 kHz to 83 kHz (automatic)
Vertical scan range
56 Hz to 76 Hz (automatic)
Maximum preset resolution
1600 X 900 at 60 Hz
Video display capabilities (DVI & DP playback)
480p, 576p, 720p
,
1080p
Display Mode
Horizontal Frequency (kHz)
Vertical Frequency (Hz)
Pixel Clock (MHz)
Sync Polarity (Horizontal/Vertical)
VESA, 720 x 400
31.5
70.0
28.3
-/+
VESA, 640 x 480
31.5
60.0
25.2
-/-
VESA, 640 x 480
37.5
75.0
31.5
-/-
VESA, 800 x 600
37.9
60.3
40.0
+/+
VESA, 800 x 600
46.9
75.0
49.5
+/+
VESA, 1024 x 768
48.4
60.0
65.0
-/-
VESA, 1024 x 768
60.0
75.0
78.8
+/+
VESA, 1152 x 864
67.5
75.0
108.0
+/+
VESA, 1600 x 900
60.0
60.0
108.0
+/+
Video input signals
Analog RGB, 0.7 Volts +/- 5%, positive polarity at 75 ohm input
impedance
Digital DVI-D TMDS, 600mV for each differential line, positive polarity at
50 ohm input impedance
DP 1.1a signal input support
Synchronization input signals
TTL levels required and separate syncs (including Trigger points), SOG
(Composite SYNC on green)
AC input
voltage/frequency/current
100 to 240 VAC/50 or 60 Hz + 3 Hz/1.5A (Typical)
Inrush current
120 V: 30 A (Max.)
240 V: 60 A (Max.)
Connector type
15-pin D-subminiature, blue connector; DVI-D, white
connector;DP,black connector.
