Steps
1. Place the system board on the palm-rest and keyboard assembly.
2. Align the screw holes on the system board with the screw holes on the palm-rest and keyboard assembly.
3. Close the right-display hinge and align the screw holes on the right-display hinge with the screw holes on the system board.
4. Place the Type-C port-bracket on the palm-rest and keyboard assembly.
5. Align the screw holes on the Type-C port-bracket to the screw holes on the right-display hinge.
6. Replace the two screws (M2x4) that secure the Type-C port-bracket to the palm-rest and keyboard assembly.
7. Connect the display cable to the connector on the system board and close the latch.
8. Adhere the tape that secures the display-cable connector latch to the system board.
9. Place the display-cable bracket over the display-cable connector.
10. Align the screw hole on the display-cable bracket to the screw hole on the system board.
11. Replace the screw (M2x3) that secures the display-cable bracket to the system board.
12. Adhere the tape that secures the display-cable bracket to the system board.
13. Connect the power-button with fingerprint-reader cable to the connector on the system board and close the latch.
14. Connect the coin-cell battery cable to the system board.
15. Connect the I/O-board cable to the connector on the system board and close the latch.
16. Connect the speaker cable to the system board.
17. Connect the touchpad cable to the connector on the system board and close the latch.
18. Connect the keyboard cable to the connector on the system board and close the latch.
19. Connect the keyboard-backlight cable to the connector on the system board and close the latch.
Next steps
1. Install the
heat sink (integrated graphics)
or the
, whichever applicable.
2. Install the
3. Install the
Removing and installing components
53
