Dell P143G Скачать руководство пользователя страница 70

Страница: 70 / 79

Table 14. System setup options—Update, Recovery menu

Update, Recovery

Dell Auto OS Recovery Threshold

Controls the automatic boot flow for SupportAssist System Resolution Console
and for Dell OS Recovery Tool.

By default, the threshold value is set to 2.

Table 15. System setup options—System Management menu

System Management

Service Tag

Displays the Service Tag of the computer.

Asset Tag

Create a computer Asset Tag.

AC Behavior

Wake on AC

Enable or disable the wake on AC option.

By default, the option is disabled.

Auto on Time

Enable to set the computer to turn on automatically every day or on a
preselected date and time. This option can be configured only if the Auto On
Time is set to Everyday, Weekdays, or Selected Days.

By default, the option is disabled.

Table 16. System setup options—Keyboard menu

Keyboard

Numlock Enable

Enable or disable the Numlock function when the computer boots.

By default, the option is enabled.

Fn Lock Options

By default, the Fn lock option is enabled.

Lock Mode

●

Lock Mode Standard - Traditional F1-F12 functions

●

Lock Mode Secondary - Enables secondary functions on the Fn keys.

Table 17. System setup options—Pre-boot Behavior menu

Pre-boot Behavior

Adapter Warnings

Enable Adapter Warnings

Enable or disable the warning messages during boot when the adapters with
less power capacity are detected.

By default, the option is enabled.

Warnings and Errors

Enable or disable the action to be done when a warning or error is encountered.

By default, the

Prompt on Warnings and Errors

option is enabled.

USB-C Warnings

Enable or disable dock warning messages.

By default, the

Enable Dock Warning Messages

option is enabled.

Fastboot

Enable to set the speed of the boot process.

By default, the

Thorough

option is enabled.

Extend BIOS POST Time

Set the BIOS POST time.

By default, the

0 seconds

option is enabled.

Table 18. System setup options—Virtualization menu

Virtualization

Intel Virtualization Technology

System setup

Содержание P143G
















































































Результаты поиска

Содержание P143G

Отзывы:

Похожие инструкции для P143G

Бренды по названию

Популярные бренды

Dell P143G, Руководство по обслуживанию

Результаты поиска

Содержание P143G

Отзывы:

Похожие инструкции для P143G

Бренды по названию

Популярные бренды