Dell P111G Скачать руководство пользователя страница 122

Страница: 122 / 139

Table 9. Security (continued)

Option

Description

●

Disabled

●

Enabled

This option is enabled by default.

Intel Paltform Trust
Technology On

This option lets you control if the Intel Platform Trust Technology feature needs to be visible in
the Operating System.

This option not set by default.

Intel SGX

If enabled, it provides a secure environment for running codes and storing information of the
Operating System.

●

Disabled

●

Enabled

●

Software Control

—Default

SMM Security
Mitigation

Allows you to enable or disable extra UEFI SMM Security Mitigation protection.

●

SMM Security Mitigation

This option is not set by default.

Passwords

Table 10. Passwords

Option

Description

Enable Strong
Passwords

Allows you to set strict rules for admin and system passwords.

The option is not set by default.

Password Configuration

Allows you to set or change the minimum and maximum characters for Admin and System
password.

●

Admin Password Min

●

Admin Password Max

●

System Password Min

●

System Password Max

Admin Password

Allows you to set, change, or delete the administrator(admin) password.

The entries to set password are:

●

Enter the old password:

●

Enter the new password:

●

Confirm new password:

Click

once you set the password.

NOTE:

For the first time login, "Enter the old password:" field is marked to "Not set." Hence,

password has to be set for the first time you login and then you can change or delete the
password.

System Password

Allows you to set, change, or delete the System password.

The entries to set password are:

●

Enter the old password:

●

Enter the new password:

●

Confirm new password:

Click

once you set the password.

122

System setup

Содержание P111G












































































































































Результаты поиска

Содержание P111G

Отзывы:

Похожие инструкции для P111G

Бренды по названию

Популярные бренды

Dell P111G, Руководство по обслуживанию

Результаты поиска

Содержание P111G

Отзывы:

Похожие инструкции для P111G

Бренды по названию

Популярные бренды