Dell OptiPlex XE2 Скачать руководство пользователя страница 40

Страница: 40 / 61

Option

Description

•

Enable USB Wake Support - This option is disabled by default.

Wake on LAN

This option allows the computer to power up from the off state when triggered by a

special LAN signal. Wake-up from the Standby state is unaffected by this setting and

must be enabled in the operating system. This feature only works when the computer

is connected to AC power supply. The options differ based on the form factor.

•

Disabled - Does not allow the system to power on by special LAN signals when it

receives a wake-up signal from the LAN or wireless LAN.

•

LAN Only - Allows the system to be powered on by special LAN signals.

•

WLAN Only - Allows the system to be powered on by special WLAN signals. (For

Ultra Small Form Factor only)

•

LAN or PXE Boot - Allows the system to be powered on by special LAN or PXE

Bootsignals. (For Ultra Small Form Factor only)

This option is Disabled by default.

Block Sleep

This option lets you block entering to sleep (S3 state) in operating system

environment.

•

Block Sleep (S3 state) - This option is disabled by default.

Intel Smart Connect

Technology

The option is disabled by default. If option enables will periodically sense nearby

wireless connection while the system is asleep. It will synchronize emails or social

media application that were open when system entered the sleep state.

•

Smart Connection

Table 8. POST Behavior

Option

Description

Numlock LED

Specifies if the NumLock function can be enabled when the system boots. This option

is enabled by default.

Keyboard Errors

Specifies whether keyboard related errors are reported when it boots. This option is

enabled by default.

POST Hotkeys

Specifies whether the sign-on screen displays a message, that displays the keystroke

sequence required to enter the BIOS Boot Option Menu.

•

Enable F12 Boot Option menu - This option is enabled by default.

MEBx Hotkeys

Specifies whether the MEBx Hotkey function should be enable when the system

boots.

•

Enable MEBx Hotkey — This option is enabled by default

Table 9. Virtualization Support

Option

Description

Virtualization

This option specifies whether a Virtual Machine Monitor (VMM) can utilize the

additional hardware capabilities provided by Intel Virtualization technology.

Содержание OptiPlex XE2






























































Результаты поиска

Содержание OptiPlex XE2

Отзывы:

Похожие инструкции для OptiPlex XE2

Бренды по названию

Популярные бренды

Dell OptiPlex XE2, Руководство пользователя

Результаты поиска

Содержание OptiPlex XE2

Отзывы:

Похожие инструкции для OptiPlex XE2

Бренды по названию

Популярные бренды