Dell OptiPlex GX1p, Руководство пользователя

Страница: 43 / 106

Video Memory Removal (Low-
Profile Chassis): Dell™ OptiPlex™ GX1p
You can upgrade video memory from 4 MB to 8 MB by installing a video-memory upgrade module in the video-memory upgrade socket on the system board. Adding
video memory increases the system
’ s video performance and provides additional modes for high-resolution/expanded color applications.
To install the video memory upgrade, follow these steps:
1. Remove the expansion-card cage .
2. Orient the video-memory upgrade module as shown in the illustration. Then carefully align the module ’ s edge connector pins with the socket, ensuring that the
slot in the module mates with the socket key.
3. Press the video-memory upgrade module firmly into the socket, and pivot the module downward until the module clicks into place.
4. Replace the expansion-card cage .
5. Replace the computer cover , and reconnect the AC power cable to the AC outlet. Press the power button on the computer to reboot the system.
6. Enter the System Setup program, and confirm that 8 MB is shown for Video Memory. If the total memory is listed incorrectly, repeat steps 1 through 6 to reseat
the video-memory upgrade module and verify that the computer acknowledges the module.
7. Run the system diagnostics (Video Test Group) to test the new video-memory upgrade module.
CAUTION: To avoid possible damage to the video-memory upgrade socket and/or video-memory upgrade module, the module is keyed and
must be correctly positioned before inserting it into the socket.
NOTE: If you do not hear a sharp click when installing the video-memory upgrade module, remove the module and repeat steps 2 and 3.
NOTE: As the system boots, it automatically detects the presence of the new video-memory upgrade module and changes the system configuration
information in the System Setup program.