manualshive.com logo in svg

Dell OptiPlex 990 Desktop, Руководство по обслуживанию, Страница: 71 / 94

Поделиться
Скачать
Dell OptiPlex 990 Desktop Скачать руководство пользователя страница 71

• If available, install working memory of the same type

into your computer.

LED

Power Button

Problem Description

Memory modules are detected, but a memory

configuration or compatibility error has occurred.

Troubleshooting Steps • Ensure that no special requirements for memory

module/connector placement exist.

• Ensure that the memory you are using is supported

by your computer.

LED

Power Button

Problem Description A possible expansion card failure has occurred.
Troubleshooting

Steps

• Determine if a conflict exists by removing an

expansion card (not a graphics card) and restarting

the computer.

• If the problem persists, reinstall the card you

removed, then remove a different card and restart

the computer.

• Repeat this process for each expansion card

installed. If the computer starts normally,

troubleshoot the last card removed from the

computer for resource conflicts.

LED

71

Содержание OptiPlex 990 Desktop































































































Отзывы:

Нет отзывов