Dell OptiPlex 7780 All-In-One Скачать руководство пользователя страница 92 | Manualshive

Страница: 92 / 99

background image

Table 10. System setup options—POST Behavior menu

POST Behavior

Numlock LED

Enable or disable Numlock LED.

By default, the

Enable Numlock LED

option is enabled.

Keyboard Error

Enable or disable the keyboard error detection.

By default, the option is enabled.

Fastboot

Enable to set the speed of the boot process.

By default, the

Thorough

option is enabled.

Extend BIOS POST Time

Set the BIOS POST time.

Full Screen Logo

Enable or disable full screen logo.

By default, the option is not enabled.

Warning and Errors

Enable or disable the action to be done when a warning or error is encountered.

By default, the

Prompt on Warnings and Errors

option is enabled.

Table 11. System setup options—Manageability menu

Manageability

AC Recovery

Enable or disable the Intel AMT capability.

By default, the

Restrict MEBx Access

option is enabled.

USB Provision

Enable or disable USB provision.

By default, the option is disabled.

MEBx Hotkey

Enable or disable the MEBx hotkey feature.

By default, the option is disabled.

Table 12. System setup options—Virtualization Support menu

Virtualization Support

Virtualization

Specify whether a Virtual Machine Monitor (VMM) can utilize the additional
hardware capabilities provided by Intel Virtualization Technology.

By default, the option is enabled.

VT for Direct I/O

Specify whether a Virtual Machine Monitor (VMM) can utilize the additional
hardware capabilities provided by Intel Virtualization Technology for Direct I/O.

By default, the option is enabled.

Trusted Execution

Specify whether a Measured Virtual Machine Monitor (MVMM) can utilize the
additional hardware capabilities provided by Intel Trusted Execution Technology.

By default, the option is disabled.

Table 13. System setup options—Wireless menu

Wireless

Wireless Device Enable

Enable or disable internal wireless devices.

By default, all the options are enabled.

Table 14. System setup options—Maintenance menu

Maintenance

Service Tag

Display the system’s Service Tag.

92

System setup

«
...
90
91
92
93
94
...
»

Содержание OptiPlex 7780 All-In-One




































































































Отзывы:

Нет отзывов

Похожие инструкции для OptiPlex 7780 All-In-One

Бренд: Samsung Страницы: 145

Бренд: VALKPC Страницы: 20

Desktop Hardware

Бренд: Digiop Страницы: 2

Бренд: Radio Shack Страницы: 276

Бренд: Compaq Страницы: 222

Бренд: DFI Страницы: 69

Бренд: Gateway Страницы: 50

Бренд: Lenovo Страницы: 18

Бренд: Lenovo Страницы: 4

Бренд: Lenovo Страницы: 4

Бренд: Lenovo Страницы: 2

90BX E50-00 Series

Бренд: Lenovo Страницы: 49

Бренд: Lenovo Страницы: 82

892204U - C200 8922 - Celeron M 1.6 GHz

Бренд: Lenovo Страницы: 56

90B6 [H50-50 ES]

Бренд: Lenovo Страницы: 63

821532U - ThinkCentre M52 - 8215

Бренд: Lenovo Страницы: 530

Бренд: Lenovo Страницы: 72

Бренд: Lenovo Страницы: 75

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды