Dell OptiPlex 7780 All-In-One Скачать руководство пользователя страница 90

Страница: 90 / 99

Table 5. System setup options—Security menu(continued)

Security

Password Bypass

Bypass the System (Boot) Password and the internal HDD password prompts during
a system restart.

By default, the

Disabled

option is enabled.

Password Change

Enable or disable changes to the System and Hard Disk passwords when an
administrator password is set.

By default, the

Allow Non-Admin Password Changes

option is enabled.

UEFI Capsule Firmware Updates

Enable or disable BIOS updates through UEFI capsule update packages.

By default, the option is enabled.

TPM 2.0 Security

Enable or disable TPM 2.0 security options.

Absolute

Enable or disable the BIOS module interface of the optional Absolute Persistence
Module service from Absolute Software.

By default, the option is enabled.

Chassis Intrusion

Enable or disable the chassis intrusion feature.

By default, the option is not enabled.

OROM Keyboard Access

Enable or disable OROM keyboard access.

By default, the option is enabled.

Admin Setup Lockout

Enable to prevent users from entering Setup when an Admin Password is set.

By default, the option is not enabled.

Master Password Lockout

Enable to prevent users from entering Setup when a Master Password is set.

By default, the option is not enabled.

HDD Protection Support

Enable or disable the HDD protection feature.

By default, the option is not enabled.

SMM Security Mitigation

Enable or disable SMM Security Mitigation.

By default, the option is enabled.

Table 6. System setup options—Secure Boot menu

Secure Boot

Secure Boot Enable

Enable or disable the secure boot feature.

By default, the option is not enabled.

Secure Boot Menu

Enable or disable to change the secure boot mode options.

By default, the

Deployed Mode

is enabled.

Expert Key Management

Enable Custom Mode

Enable or disable custom mode.

Expert Key Management

Enable or disable Expert Key Management.

Custom Mode Key Management

Select the custom values for expert key management.

Table 7. System setup options—Intel Software Guard Extensions menu

Intel Software Guard Extensions

Intel SGX Enable

Enable or disable Intel Software Guard Extensions.

By default, the

Software Controlled

option is enabled.

System setup

Содержание OptiPlex 7780 All-In-One




































































































Результаты поиска

Содержание OptiPlex 7780 All-In-One

Отзывы:

Похожие инструкции для OptiPlex 7780 All-In-One

Бренды по названию

Популярные бренды

Dell OptiPlex 7780 All-In-One, Руководство по обслуживанию

Результаты поиска

Содержание OptiPlex 7780 All-In-One

Отзывы:

Похожие инструкции для OptiPlex 7780 All-In-One

Бренды по названию

Популярные бренды