Dell OptiPlex 5040 Series, Руководство пользователя

Страница: 61 / 63

Feature Specification
Internal speaker 4-pin connector
RTC reset jumper 2-pin connector
Intruder connector One 3-pin connector
Power connector 8-pin PSU, 4-pin CPU ,6-pin, SATA
connector
Table 44. Controls and lights
Feature Specification
Front of the computer
Power button light White light — Solid white light indicates power-on state;
blinking white light indicates sleep state of the
computer.
Drive activity light White light — Blinking white light indicates that the
computer is reading data from or writing data to the
hard drive.
Back of the computer
Link integrity light on integrated network
adapter Green — a 100 Mbps connection exists between the
network and the computer.
Green — a 100 Mbps connection exists between the
network and the computer.
Orange — a 1000 Mbps connection exists between the
network and the computer.
Off (no light) — the computer is not detecting a physical
connection to the network.
Network activity light on integrated
network adapter Yellow light — A blinking yellow light indicates that
network activity is present.
Power supply diagnostic light Green light — The power supply is turned on and is
functional. The power cable must be connected to the
power connector (at the back of the computer) and the
electrical outlet.
Table 45. Power
NOTE: Heat dissipation is calculated by using the power supply wattage rating.
Wattage Maximum Heat
Dissipation
Voltage
Small Form Factor 180 W 614.00 BTU/hr 100 V AC to 240 V AC, 50 Hz
to 60 Hz, 3 A/ 1.5 A
Coin cell battery 3 V CR2032 lithium coin cell
61