b.
c.
d.
e.
5.
After Working Inside Your Computer
Removing the processor
1.
Before Working Inside Your Computer
.
2.
Remove the:
a.
b.
c.
d.
e.
f.
3.
To remove the processor:
a. Release the socket lever by pushing the lever down and out from under the tab on the processor
shield [1].
b. Lift the lever upward and lift the processor shield [2].
c. Lift the processor out of the socket [3].
Installing the processor
1.
Align the processor with the socket keys.
2.
Align the pin-1 indicator of the processor with the triangle on the socket.
3.
Place the processor on the socket such that the slots on the processor align with the socket keys.
4.
Close the processor shield by sliding it under the retention screw.
5.
Lower the socket lever and push it under the tab to lock it.
6.
Install the:
a.
b.
c.
d.
e.
f.
7.
After Working Inside Your Computer
11
Содержание OptiPlex 5040 Series
Страница 1: ...OptiPlex 5040 Small Form Factor Owner s Manual Regulatory Model D11S Regulatory Type D11S001 ...
Страница 7: ...5 If required verify that the computer works correctly by running Dell Diagnostics 7 ...
Страница 30: ...29 Internal USB connector 30 SATA1 connector 31 Coin cell battery 30 ...
