manualshive.com logo in svg

Dell OptiPlex 390 Mini-Tower, Руководство пользователя, Страница: 87 / 92

Поделиться
Скачать
Dell OptiPlex 390 Mini-Tower Скачать руководство пользователя страница 87

System Board Connectors

Small Form Factor

one 5-pin connector

Password clear jumper

one 3-pin connector

RTC reset jumper

one 3-pin connector

Internal speaker

one 5-pin connector

Intruder connector

one 3-pin connector

Power connector

one 24-pin and one 4-pin connector

Controls and Lights

Front of the computer:

Power button light

Blue light — Solid blue light
indicates power-on state; blinking
blue light indicates sleep state of
the computer.

Amber light — Solid amber light
when the computer does not start
indicates a problem with the
system board or power supply.
Blinking amber light indicates a
problem with the system board.

Drive activity light

Blue light — Blinking blue light
indicates that the computer is
reading data from or writing data to
the hard drive.

Diagnostic lights

Four lights located on the front
panel of the computer. For more
information on the diagnostic lights,
see the Service Manual at
support.dell.com/manuals.

Back of the computer:

Power supply diagnostic light

Green light — The power supply is
turned on and is functional. The
power cable must be connected to
the power connector (at the back

87

Содержание OptiPlex 390 Mini-Tower





























































































Отзывы:

Нет отзывов