Dell OptiPlex 390 Mini-Tower Скачать руководство пользователя страница 65

Страница: 65 / 92

POST Behavior

Keyboard Errors

Allows you to enable or disable the keyboard error reporting
when the computer starts. This option is enabled by default.

POST Hotkeys

Allows you to specify the function keys to display on the screen
when the computer starts.
Enable F12 — Boot menu (enabled by default)

Fast Boot

This option can speed up the boot process by bypassing some
compatibility steps:

•

Minimal — The system boots quickly, unless the BIOS has

been updated, memory changed, or the previous POST did

not complete.

•

Thorough — The system does not skip any steps in the boot

process.

•

Auto — This allows the operating system to control this

setting (this works only when the operating system supports

Simple Boot Flag).

This option is set to Thorough by default.

Virtualization Support

Virtualization

This option specifies whether a Virtual Machine Monitor (VMM)
can utilize the additional hardware capabilities provided by
Intel

Virtualization Technology. Enable Intel Virtualization

Technology - This option is disabled by default.

VT for Direct I/O

Enables or disables the Virtual Machine Monitor (VMM) from
utilizing the additional hardware capabilities provided by Intel

Virtualization technology for direct I/O. Enable Intel
Virtualization Technology for Direct I/O - This option is disabled
by default.

Maintenance

Service Tag

Displays the Service Tag of your computer.

Asset Tag

Allows you to create a system asset tag if an asset tag is not
already set. This option is not set by default.

SERR Messages

Controls the SERR message mechanism. This option is not set
by default. Some graphics cards require that the SERR message
mechanism be disabled.

Содержание OptiPlex 390 Mini-Tower





























































































Результаты поиска

Содержание OptiPlex 390 Mini-Tower

Отзывы:

Dell OptiPlex 390 Mini-Tower, Руководство пользователя, Страница: 65 / 92

Результаты поиска

Содержание OptiPlex 390 Mini-Tower

Отзывы: