![Dell Networking C9010 Скачать руководство пользователя страница 8](http://html.mh-extra.com/html/dell/networking-c9010/networking-c9010_getting-started-manual_84493008.webp)
3.
Hold the rack bar so that the smooth side faces outward and the arrows point upward. The smooth
side of the bar faces outward. Attach the bar to the rack posts using the mounting screws and
washers (items 2 and 3 in Figure 2) provided for the rack. Use the rack bar as a guide to mount the
chassis.
Figure 2. Installing a Rack Bar in a 2-Post Rack
NOTE: The installation procedure in this section describes how to install the C9010 in a rack
using the rack bar provided in the base configuration package. For information about how to
use Dell ReadyRails or a rack mount tray to install the C9010 in a rack, see
.
4.
Using a flat-head screwdriver, remove the bracket screws (item 2 in Figure 3), brackets (item 3 in
Figure 3), and thumb screws (item 4 in Figure 3) attached to each side of the chassis.
8
Installing the Hardware
REGULATORY
DRAFT
11-4-14