4
|
101-00348-05
www.dell.com | support.dell.com
•
LAG is NOT supported on the 4-port 40G line card.
•
The 4-port 40G line card can be configured for linerate or oversubscribed mode (
linecard
id
[linerate |
oversubscribes] active-ports port-set
number CLI in CONFIGURATION mode).
•
The line card must be rebooted when mode or port changes are made.
•
Line card boot up may take up to 6 minutes.
Figure 1-8. ExaScale 90-port 1G line card
NOTE:
90-port 1G line cards have six port LEDs per input connector (one for every physical port).
Figure 1-9. ExaScale 10-port 10G line card
Figure 1-10. ExaScale 50-port 10G line card
