Dell Latitude E6440 Скачать руководство пользователя

Страница: 57 / 69

Option

Description

•

Block Sleep (S3)

Peak Shift

Allows you to set the peak shift. The option is disabled by default.

Advanced Battery Charge

Configuration

Allows you to enable the advance battery charge mode. The option is disabled by

default.

Primary Battery Charge

Configuration

A Long Life Cycle battery is currently attached. The charge configuration cannot be

changed with this type of battery.

Battery Slice Charge

Configuration

Allows you to define the how to charge the battery. The options are:

•

Standard Charge

•

Express Charge (Default Setting)

Intel(R) Smart Connect

Technology

Allows you to enable the system to sense nearby wireless connection while the

system is asleep. The option is disabled by default.

Table 9. POST Behavior

Option

Description

Adapter Warnings

Allows you to activate the adapter warning messages when certain power

adapters are used. The option is enabled by default.

•

Enable Adapter Warnings

Keypad (Embedded)

Allows you to choose one of the methods to enable the keypad that is embedded in

the internal keyboard. The options are:

•

Fn Key Only (Default Setting)

•

By Numlock

Mouse/Touchpad

Allows you to define how the computer handles the mouse and touchpad input. The

options are:

•

Serial Mouse

•

PS2 Mouse

•

Touchpad/PS-2 Mouse (Default Setting)

Numlock Enable

Specifies if the NumLock function can be enabled when the computer boots. This

option is enabled by default.

•

Enable Numlock

Fn Key Emulation

Allows you to match the <Scroll Lock> key feature of PS-2 keyboard with the <Fn>

key feature in an internal keyboard. The option is enabled by default.

•

Enable Fn Key Emulation

Fastboot

Allows you to speed up the boot processes. The options are:

•

Minimal

•

Thorough (Default Setting)

•

Auto

Содержание Latitude E6440






































































Результаты поиска

Содержание Latitude E6440

Отзывы:

Похожие инструкции для Latitude E6440

Бренды по названию

Популярные бренды

Dell Latitude E6440, Руководство пользователя

Результаты поиска

Содержание Latitude E6440

Отзывы:

Похожие инструкции для Latitude E6440

Бренды по названию

Популярные бренды