Dell Latitude E6440 страница 56 Скачать руководство пользователя

Страница: 56 / 69

Option

Description
Default Setting: Enable Intel TurboBoost

Hyper-Thread Control

Allows you to enable or disable the

HyperThreading in the processor.
Default Setting: Enabled

Rapid Start Technology

Allows you to set the rapid start time. The

option is set by default.

Table 8. Power Management

Option

Description

AC Behavior

Allows the computer to power-uon automatically, when AC adapter is plugged. The

option is disabled.

•

Wake on AC

Auto On Time

Allows you to set the time at which the computer must turn on automatically. The

options are:

•

Disabled (Default Setting)

•

Every Day

•

Weekdays

•

Select Days - The system will power up on days selected above at the time you

specified.

NOTE: This feature does not work if you turn off your computer using the

switch on a power strip or surge protector or if Auto Power is set to disabled.

USB Wake Support

Allows you to enable the USB devices to wake the computer from standby mode.

The option is disabled

•

Enable USB Wake Support

Wireless Radio Control

Allows you to control the WLAN and WWAN radio. The options are:

•

Control WLAN radio

•

Control WWAN radio

Default Setting: Both the options are disabled.

Wake on LAN/WLAN

This option allows the computer to power up from the off state when triggered by a

special LAN signal. Wake-up from the Standby state is unaffected by this setting

and must be enabled in the operating system. This feature only works when the

computer is connected to AC power supply.

•

Disabled - Does not allow the system to power on by special LAN signals when

it receives a wake-up signal from the LAN or wireless LAN. (Default Setting)

•

LAN Only - Allows the system to be powered on by special LAN signals.

•

WLAN Only

•

LAN or WLAN

•

LAN with PXE Boot

Block Sleep

Allows you to block the computer from entering into the sleep state. Option is

disabled by default.

Содержание Latitude E6440






































































Результаты поиска

Содержание Latitude E6440

Отзывы:

Похожие инструкции для Latitude E6440

Бренды по названию

Популярные бренды

Dell Latitude E6440, Руководство пользователя

Результаты поиска

Содержание Latitude E6440

Отзывы:

Похожие инструкции для Latitude E6440

Бренды по названию

Популярные бренды