Dell Latitude E6420 XFR Скачать руководство пользователя

Страница: 17 / 23

Dell Latitude E6420 XFR Setup and Features Information

eGalaxTouch Configuration Utility |

Page 17

Setting

The Setting property page provides the following buttons and check boxes:

Beep

• Beep On Touch

Check this check box to enable driver to generate a beep sound when touch

touchscreen state is switched from untouched to touched state.

• Beep On Release

Check this check box to enable driver to generate a beep sound when touchscreen state

is switched from touched state to untouch state.

• Frequency

Adjust this frequency to control the beep sound frequency generated by the driver.

• Duration

Adjust this duration to control the beep sound duration.

Linearization Style

The eGalaxTouch utility provides you with both 9 points and 25 points calibration for

linearization. You can select the suitable kind of linearization type with this setting. The

Linearization function is accessed under the “Tools” tab.

Double Click Time

The double Click Time group is used to set system double click time. Changing this value

will affect the double click behavior for all of the mice devices in the system. Two continuous

clicks at the same area within this specified time period will be recognized as a double click

event.

Double Click Area

The double click area group is used to set the system double click area. Changing this value

will affect the double click behavior for all of the mice devices in the system. Two continuous

clicks within the specified area in the specified double click time will be recognized as a

double click event.

Mouse Emulation mode

There are 5 mouse emulation modes for the eGalaxTouch touch screen controllers. Press on

the button to change the emulation mode.

• Normal Mode

You can select this mode to select objects, and drag objects.

• Click On Touch

With this Click On Touch mode, the driver emulates a mouse click event when the

touch screen state is switched from un-touched state to touched state. Then, the driver

always generates a mouse move event and tracks the touch position until the touch

screen state switches to the un-touch state.

• Click On Release

With this Click On Release mode, the driver emulates a mouse click event when the

touch screen state is switched from touched state to un-touched state.

Содержание Latitude E6420 XFR
























Результаты поиска

Содержание Latitude E6420 XFR

Отзывы:

Похожие инструкции для Latitude E6420 XFR

Бренды по названию

Популярные бренды

Dell Latitude E6420 XFR, Информация о настройке и функциях

Результаты поиска

Содержание Latitude E6420 XFR

Отзывы:

Похожие инструкции для Latitude E6420 XFR

Бренды по названию

Популярные бренды