Installing the optional SmartCard reader board
1. Insert the SmartCard reader board into the slot on the computer.
2. Tighten the screws to secure the SmartCard reader board to the computer.
3. Connect the SmartCard reader cable to the connector on the USH board.
4. Install the:
a.
b.
c.
d.
e.
f.
After working inside your computer
.
Fingerprint reader
Removing the optional finger print reader board
Before working inside your computer
.
2. Remove the:
a.
b.
c.
d.
e.
f.
3. To remove the finger print reader board:
a. Disconnect the finger print reader cable from the finger print reader board [1, 2].
b. Remove the screw that secures the finger print reader board to the computer [3].
c. Lift the finger print reader board from the computer [4].
Disassembly and reassembly
27
