a. Remove the screw and lift the metal bracket [1,2].
b. Disconnect the eDP cable [3].
c. Remove the screws that secure the dock frame to the computer [4].
d. Lift the dock frame from the computer [5].
Installing the dock frame
1.
Place the dock frame on the computer and tighten the screws.
2.
Connect the eDP cable.
3.
Place the metal bracket and tighten the screw.
4.
Connect the keyboard cable.
5.
Place the SSD plate and tighten the screw to secure it.
NOTE: Step 5 is required only if the PCIe SSD card is removed.
6.
Tighten the screws to secure the dock frame to the computer.
7.
Install the:
a.
WWAN card
b.
WLAN card
c.
hard drive assembly
or
M.2 SSD
or
PCIe SSD
d.
battery
e.
base cover
8.
Follow the procedure in
After working inside your system
.
Removing the optional SmartCard reader board
1.
Follow the procedure in
Before working inside your computer
.
2.
Remove the:
a.
base cover
b.
battery
c.
hard drive assembly
or
M.2 SSD
or
PCIe SSD
d.
dock frame
3.
To remove the SmartCard reader board:
a. Disconnect the SmartCard reader board cable from the USH board [1, 2].
b. Peel the cable to release from the adhesive.
22
